|
|
Using suction cups:
Insert point into plastic ball, being careful not to hurt yourself on opposing points. Using MTC-1's to repair a finished piece:
When gluing a cracked piece that is finished and you don't want indentations on it; carefully use a chisel, screwdriver or putty knife to open crack. Apply glue inside crack on both sides.
Use a piece of paper to spread glue in crack. Clamp crack closed using basic clamping procedures. Wipe off excess glue. Allow time for glue to dry and remove clamp.
|
|
Send mail to
maestrocompany@aol.com with
questions or comments about this web site.
|
